Reasons Your Hot Water Heater Isn't Working
Reasons Your Hot Water Heater Isn't Working
Blog Article
The content below on the subject of How to Troubleshoot and Repair an Electric Water Heater is rather attention-grabbing. You should check it out.
Lots of modern residences use an electric water heater for their heating system, as a result of its comfort as well as ease of use. Nonetheless, much like any other electric home appliances, problems might arise with its use, unexpectedly. It can be truly frustrating to get up to a cold shower rather than a hot one or having your bath with water that isn't warm sufficient or perhaps too warm. Whatever the case may be, hot water heater issues can be fairly nerve-racking. Luckily, we've made a list of feasible remedies to your water heater problems. There are a variety of aspects that could create a number of these issues, maybe an issue with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you switch off the main power supply for security. Whatever the trouble is, getting it repaired must not posture too much of a problem if you comply with these actions:
Examine Your Power Supply:
As basic as this may appear, it is really required. Without sufficient power, your hot water heater will certainly not function. So the first thing to do when your water all of a sudden stops working is to verify that it isn't a power trouble. Check if the fuse is blown out or the circuit breaker stumbled. If the breaker is the concern, simply turn it off and on once again. Change any kind of busted or worn-out fuse. Evaluate the home appliance with power after these adjustments to see if it's currently functioning.
Examine the Burner in the Water Heater:
If it's not a power problem, then try taking a look at your burner if it is still functioning. Examine each of your burner to ensure the problem isn't with any of them. If any of them is faulty, replace that part and then check whether the hot water is back on.
Check Your Thermostat:
If your hot water heater still isn't functioning or the water appearing isn't warm enough, you may need to check the temperature level setups on your top thermostat. Make sure the circuit breaker is switched off before doing anything. Open the accessibility panel and also press the red switch for temperature reset above the thermostat. This should help warm the water. Transform the circuit breaker back on and inspect if the issue has actually been fixed.
Call An Expert:
If after replacing all defective parts and resetting your temperature, the water heater still isn't functioning, you might require to call an expert plumber for a professional point of view. The issue with your heater could be that the hot and cold faucets have been switched or it might be undersized for the quantity of hot water required in your house. Whatever the situation might be, a professional plumber would certainly assist resolve the problem.
Verdict
Water heater problems are not constantly major. Many of them result from minor issues like a blown fuse or worn-out burner. Changing the malfunctioning parts ought to do the trick. Nonetheless, if you are still not able to resolve the problem, give a call to your local plumber to find to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We had been made aware of that write-up on Hot Water Heater Repair through a friend on another site. Sharing is caring. Helping others is fun. I praise you for your time. Come back soon.
Call
Report this page